Steel-Spiral-Springs

DURASPRING Spiral springs can be installed in both, horizontal and vertical applications: Horizontal installation Vertical installation Our DURASPRING Spiral Springs are manufactured speci[1]fically to suit horizontal or vertical operation. For horizontal applications, the extension is reduced (see tabulations). Horizontal installation Springs used horizontally are formed for particularly for uniform running in that the overlap between coils is increa[1]sed. In this way »sagging« is reduced, particularly for longer extension lengths, and transverse stability is significantly improved. In the case of horizontal installation of the springs, placing the larger diameter adjacent to the area of swarf produc[1]tion is recommended. Vertical installation As a matter of principle, vertically installed DURASPRING achieve larger extension lengths than horizontal types. The critical design factor for this type is the force produced, as the springs must also work against gravity. Vertical types therefore have a high starting force, guaranteeing that the DURASPRING draws out rapidly when starting/ extending with the machine movement. For efficient protection and optimum operation, vertical spirals should be mounted with the large diameter at the top. Flanges (optional) Simple centring flanges are required at both ends of the DURASPRING for installation (see order sheet). These flanges must permit rotary movements of the spring that may occur, in order to prevent damage to the springs. The springs must be guided so that they can move freely. It is not permitted to screw and/or rivet them. When using flanges, the spindle diameter SD is reduced by 6 mm compared to the values given on the following pages.

Lowest dynamic load factor (kN)
(kN): 0.7113
Material
Active filters
ID Innendurchmesser der Spiralfeder mm
Lv Maximale Auszugslänge bei vertikaler Einbaulage mm
Maximale Auszugslänge bei horizontaler Einbaulage
BB Bandbreite mm
Name Weight Dynamic
load factor
Preis € CAD Model
110-2800-200 SPIRALFEDER-GEBLÄUT 16.4 675.99 CAD Modell Details
110-2800-200 SPIRALFEDER-GEBLÄUT 16.4 675.99 CAD Modell Details
50-2800-150 SPIRALFEDER-GEBLÄUT 9 494.02 CAD Modell Details
50-2800-150 SPIRALFEDER-GEBLÄUT 9 494.02 CAD Modell Details
55-2800-120 SPIRALFEDER-GEBLÄUT 8 368.88 CAD Modell Details
55-2800-120 SPIRALFEDER-GEBLÄUT 8 368.88 CAD Modell Details
55-2800-150 SPIRALFEDER-GEBLÄUT 9.3 496.92 CAD Modell Details
55-2800-150 SPIRALFEDER-GEBLÄUT 9.3 496.92 CAD Modell Details
55-2800-180 SPIRALFEDER-GEBLÄUT 10 549.99 CAD Modell Details
55-2800-180 SPIRALFEDER-GEBLÄUT 10 549.99 CAD Modell Details
60-2800-120 SPIRALFEDER-GEBLÄUT 8.5 371.64 CAD Modell Details
60-2800-120 SPIRALFEDER-GEBLÄUT 8.5 371.64 CAD Modell Details
60-2800-150 SPIRALFEDER-GEBLÄUT 8.75 502.86 CAD Modell Details
60-2800-150 SPIRALFEDER-GEBLÄUT 8.75 502.86 CAD Modell Details
65-2800-120 SPIRALFEDER-GEBLÄUT 9 433.70 CAD Modell Details
65-2800-120 SPIRALFEDER-GEBLÄUT 9 433.70 CAD Modell Details
65-2800-150 SPIRALFEDER-GEBLÄUT 10.5 509.10 CAD Modell Details
65-2800-150 SPIRALFEDER-GEBLÄUT 10.5 509.10 CAD Modell Details
70-2800-180 SPIRALFEDER-GEBLÄUT 13 565.21 CAD Modell Details
70-2800-180 SPIRALFEDER-GEBLÄUT 13 565.21 CAD Modell Details
75-2800-150 SPIRALFEDER-GEBLÄUT 11.8 542.59 CAD Modell Details
75-2800-150 SPIRALFEDER-GEBLÄUT 11.8 542.59 CAD Modell Details
75-2800-180 SPIRALFEDER-GEBLÄUT 14 574.93 CAD Modell Details
75-2800-180 SPIRALFEDER-GEBLÄUT 14 574.93 CAD Modell Details
80-2800-180 SPIRALFEDER-GEBLÄUT 14.3 608.86 CAD Modell Details
80-2800-180 SPIRALFEDER-GEBLÄUT 14.3 608.86 CAD Modell Details
       

Showing all 26 results

HIDE FILTER
Lowest dynamic load factor (kN)
(kN): 0.7113
Material
Active filters
ID Innendurchmesser der Spiralfeder mm
Lv Maximale Auszugslänge bei vertikaler Einbaulage mm
Maximale Auszugslänge bei horizontaler Einbaulage
BB Bandbreite mm
Shopping cart close